Enabling and disabling parksenseĥ, Enabling and disabling parksense – Ram Trucks 2011 3500 - Owner Manual User Manual

Page 144

Advertising
background image

WARNING ALERTS

Rear Distance

(in/cm)

Greater than

79 in (200 cm)

79-39 in

(200-100 cm)

39-25 in

(100-65 cm)

25-12 in

(65-30 cm)

Less than

12 in (30 cm)

Audible Alert

Chime

None

Single 1/2

Second Tone

Slow

Fast

Continuous

Display Message

Park Assist ON

Warning Object

Detected

Warning Object

Detected

Warning Object

Detected

Warning Object

Detected

Arcs

None

3 Solid

(Continuous)

3 Slow

Flashing

2 Slow

Flashing

1 Slow

Flashing

Radio Mute

No

Yes

Yes

Yes

Yes

NOTE:

ParkSense

௡ will MUTE the radio, if on, when

the system is sounding an audio tone.

Enabling And Disabling ParkSense

ParkSense

௡ can be enabled and disabled with a switch

located in the switch bank of the instrument panel or
through the Customer-Programmable Features section of
the EVIC. The available choices are: OFF, Sound Only, or

Sound and Display. Refer to “Electronic Vehicle Informa-
tion

Center

(EVIC)/Personal

Settings

(Customer-

Programmable Features)” in “Understanding Your In-
strument Panel” for further information.

When the ParkSense

௡ switch is pressed to

disable the system, the instrument cluster will
display the “PARK ASSIST OFF” message for

142

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Advertising
This manual is related to the following products: