Ram Trucks 2011 3500 - Owner Manual - Manual (Page 503)

Operate the jack using the jack drive tube and the wheel
wrench. The tube extension may be used but is not
required.
For 4x2 and 4x4 trucks, when changing a rear wheel,
assemble the jack drive tube to the jack and connect the
drive tube to the extension tube. Place the jack under the
axle between the wheel and the shock bracket with the
drive tubes extending to the rear.
Connect the jack tube extension and wheel wrench.
4X4 Jacking Location
Rear Jacking Location
6
WHAT TO DO IN EMERGENCIES 501