Removing the spare tire – Ram Trucks 2011 3500 - Owner Manual User Manual

Page 499

Advertising
background image

Removing The Spare Tire
Remove the spare tire before attempting to jack up the
truck. Attach the wheel wrench to the jack extension tube.
Insert the tube through the access hole between the lower
tailgate and the top of the bumper and into the winch
mechanism tube. Rotate the wheel wrench handle coun-
terclockwise until the spare tire is on the ground with

enough cable slack to allow you to pull it out from under
the vehicle. When the spare is clear, tilt the retainer at the
end of the cable and pull it through the center of the wheel.
NOTE:

Always stow the spare tire with the valve stem

facing the ground.

Jack And Tools (2500/3500 Series)

Removing The Spare Tire

1 — Wheel Wrench
2 — Spare Tire

6

WHAT TO DO IN EMERGENCIES

497

Advertising
This manual is related to the following products: