Rear lamp bar id marker, Dual rear wheels) — if equipped – Ram Trucks 2011 3500 - Owner Manual User Manual
Page 580
Advertising
Rear Lamp Bar ID Marker (Dual Rear Wheels) — If
Equipped
1. Loosen the two screws and the housing to gain access
to the bulb sockets.
2. Turn the socket
1
⁄
4
turn counterclockwise to access the
bulb.
3. Pull the bulb straight out from the socket.
4. Reverse the procedure for installation of the bulbs and
housing.
578
MAINTAINING YOUR VEHICLE
Advertising
This manual is related to the following products: