Headlight switch and halo light switch, Automatic headlights/parking lights/headlights, Smartbeams – Ram Trucks 2012 С/V - User Guide User Manual

Page 27: Instrument panel dimmer, Overhead (halo) light, Operating your vehicle

Advertising
background image

HEADLIGHT SWITCH AND HALO LIGHT SWITCH

Automatic Headlights/Parking
Lights/Headlights

• Rotate the headlight switch, located on

the instrument panel to the left of the
steering wheel, to the first detent for
parking lights

and to the

second detent for headlights

.

• With the parking lights or low beam

headlights on, push the headlight
switch once for fog lights.

• Rotate the headlight switch to “AUTO”

for AUTO headlights.

• When set to AUTO, the system automatically turns the headlights on or off based

on ambient light levels.

SmartBeams™

• This system automatically controls the use of the headlight high beams. Refer to

Programmable Features in Electronics for further details.

Instrument Panel Dimmer

• Rotate the dimmer control to the extreme bottom position to fully dim the

instrument panel lights and prevent the interior lights from illuminating when a
door is opened.

• Rotate the dimmer control up to increase the brightness of the instrument panel

when the parking lights or headlights are on.

• Rotate the dimmer control up to the next detent position to fully brighten the

odometer and radio when the parking lights or headlights are on. Refer to your
Media Center/Radio User Manual on the DVD for display dimming.

• Rotate the dimmer control up to the last detent position to turn on the interior

lighting.

Overhead (Halo) Light

• To activate the Halo lights, rotate the Halo switch control upward or downward to

increase or decrease the lighting.

OPERATING YOUR VEHICLE

25

Advertising