Jacking and tire changing, Jack location, Spare tire removal – Ram Trucks 2012 С/V - User Guide User Manual

Page 89: To access spare tire winch drive nut, What to do in emergencies

Advertising
background image

JACKING AND TIRE CHANGING

Jack Location

• The jack, jack handle and winch handle tools are stowed behind the rear left side

trim panel in the rear cargo area. Turn the two cover latches to release the cover.

• Remove the pouch containing the

scissors jack, jack handle, and tools.

Spare Tire Removal

• The spare tire is stowed inside a

protective cover located under the
center of the vehicle between the front
doors by means of a cable winch
mechanism. The “spare tire drive” nut
is located on the floor, under a plastic
cap at the front of the floor console or
under front super console forward bin
liner.

To Access Spare Tire Winch Drive Nut

• To access the spare tire winch drive nut and lower the spare tire, you will need to

refer to one of the following center console configurations.

Super Console

• For vehicles equipped with the Super Console, the spare tire winch assembly drive

nut is located beneath the console.

WHAT TO DO IN EMERGENCIES

87

Advertising