Jacking instructions, What to do in emergencies – Ram Trucks 2012 С/V - User Guide User Manual
Page 93
Advertising
NOTE: Passengers should not remain in the
vehicle when the vehicle is being jacked.
• Block both the front and rear of the
wheel diagonally opposite the jacking
position. For example, if changing the
right front tire, block the left rear
wheel.
Jacking Instructions
1. Loosen (but do not remove) the wheel
lug nuts by turning them to the left
one turn while the wheel is still on the
ground.
2. There are two jack engagement
locations on each side of the vehicle
body. These locations are on the sill
flange of the vehicle body.
Rear jack locations are between a pair
of down-facing tabs on the sill flange
of the vehicle side body.
WHAT TO DO IN EMERGENCIES
91
Advertising