Disconnecting the rear camera or remote, Keyless entry — if equipped – Ram Trucks 2013 3500 - Owner Manual User Manual
Page 248
Advertising
Disconnecting the Rear Camera or Remote
Keyless Entry — If Equipped
1. Open the tailgate to access the rear camera or RKE
connector bracket located on the rear sill.
2. Remove the connector bracket from the sill by press-
ing inward in the locking tab.
3. Disconnect the chassis wiring harness, ensuring the
connector bracket does not fall into the sill.
Connector Bracket
Locking Tab
246
UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Advertising
This manual is related to the following products: