Axle locker system (2500 models only), If equipped – Ram Trucks 2013 3500 - Owner Manual User Manual

Page 419

Advertising
background image

• Wheel Alignment Mode – indicator lamps 3 and 4 will

be illuminated. Wheel Alignment Mode is disabled by
driving the vehicle.

AXLE LOCKER SYSTEM (2500 MODELS ONLY) —
IF EQUIPPED

This vehicle is equipped with electronically locking front
and rear differentials. These differentials, when engaged,
mechanically lock together the axle shafts forcing the
wheels to spin at an equal rate. This allows the vehicle to
maintain its momentum and prevents it from becoming
stuck. The locking front and rear differentials should only
be engaged during low-speed, extreme off-road situa-
tions where one wheel is likely to not be in contact with
the ground. It is not recommended to drive the vehicle
with the differentials locked on pavement due to the
reduced ability to turn and speed limitations.

CAUTION!

Do not lock the front or rear axle on hard surfaced

roads. The ability to steer the vehicle is reduced
and damage to the drivetrain may occur when the
axles are locked on hard surfaced roads.

Do not try to lock the rear axle if the vehicle is

stuck and the tires are spinning. You can damage
drivetrain components. Lock the rear axle before
attempting situations or navigating terrain, which
could possibly cause the vehicle to become stuck.

The locking axles are controlled by the axle locker switch.

The switch has three positions, AXLE UNLOCK, REAR
LOCK, and FRONT/REAR LOCK. Under normal driv-
ing conditions, the switch should be left in the AXLE
UNLOCK position. In the AXLE UNLOCK position, the
front and rear axles are unlocked. In the REAR LOCK

5

STARTING AND OPERATING

417

Advertising
This manual is related to the following products: