Rear lamp bar id marker (dual rear wheels), If equipped – Ram Trucks 2013 3500 - Owner Manual User Manual
Page 689
Advertising
Rear Lamp Bar ID Marker (Dual Rear Wheels) — If
Equipped
1. Loosen the two screws and the housing to gain access
to the bulb sockets.
2. Turn the socket ¼ turn counterclockwise to access the
bulb.
3. Pull the bulb straight out from the socket.
4. Reverse the procedure for installation of the bulbs and
housing.
7
MAINTAINING YOUR VEHICLE
687
Advertising
This manual is related to the following products: