Overdrive operation, When to use tow/haul mode – Ram Trucks 2013 3500 - Owner Manual User Manual

Page 376

Advertising
background image

Overdrive Operation

The automatic transmission includes an electronically
controlled Overdrive (fourth and fifth gears). The trans-
mission will automatically shift into Overdrive if the
following conditions are present:
• the shift lever is in the DRIVE position,
• the transmission fluid has reached an adequate

temperature,

• the engine coolant (antifreeze) has reached an ad-

equate temperature,

• vehicle speed is sufficiently high, and
• the TOW/HAUL switch has not been activated.

When To Use TOW/HAUL Mode

When driving in hilly areas, towing a trailer, carrying a
heavy load, etc., and frequent transmission shifting oc-
curs, press the TOW/HAUL switch to activate TOW/

HAUL mode. This will improve performance and reduce
the potential for transmission overheating or failure due
to excessive shifting. When operating in TOW/HAUL
mode, transmission upshifts are delayed, and the trans-
mission will automatically downshift (for engine brak-
ing) during steady braking maneuvers.

TOW/HAUL Switch

374

STARTING AND OPERATING

Advertising
This manual is related to the following products: