Remote starting system, How to use remote start – Ram Trucks 2014 Chassis Cab Commercial - Diesel Supplement User Manual

Page 12

Advertising
background image

REMOTE STARTING SYSTEM

This system uses the Remote Keyless Entry

(RKE) transmitter to start the engine conve-

niently from outside the vehicle while still

maintaining security. The system has a range of

approximately 300 ft (91 m).
NOTE:

• The vehicle must be equipped with an automatic

transmission to be equipped with Remote Start.

• The Remote Start system will wait for the “Wait To

Start” amber telltale to extinguish before cranking the

engine. This allows time for the engine pre-heat cycle

to pre-heat the cylinder air, and is normal in cold

weather. Refer to “Electronic Vehicle Information

Center/EVIC Warning Lights” in “Understanding

Your Instrument Panel” for further information on the

“Wait To Start” amber telltale and the pre-heat cycle.

How To Use Remote Start

All of the following conditions must be met before the

engine will remote start:

• Shift lever in PARK
• Doors closed
• Hood closed
• HAZARD switch off
• BRAKE switch inactive (brake pedal not pressed)
• Battery at an acceptable charge level
• RKE PANIC button not pressed
• Fuel meets minimum requirement
• Water In Fuel Indicator Light is not illuminated
• “Wait To Start” telltale is not illuminated

10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Advertising