Fuel requirements – Ram Trucks 2014 Chassis Cab Commercial - Diesel Supplement User Manual

Page 69

Advertising
background image

WARNING!

Remember to disconnect the cord before driving.
Damage to the 110–115 Volt electrical cord could
cause electrocution.

NOTE:

The block heater will require 110 Volts AC and

6.5 Amps to activate the heater element.

FUEL REQUIREMENTS

Use good quality diesel fuel from a reputable supplier in

your vehicle. Federal law requires that you must fuel this

vehicle with Ultra Low Sulfur Highway Diesel fuel (15

ppm Sulfur maximum) and prohibits the use of Low

Sulfur Highway Diesel fuel (500 ppm Sulfur maximum)

to avoid damage to the emissions control system.
For most year-round service, No. 2 diesel fuel meeting

ASTM (formerly known as the American Society for

Testing and Materials) specification D-975 Grade S15 will

provide good performance. If the vehicle is exposed to

extreme cold (below 20°F or -7°C), or is required to

operate at colder-than-normal conditions for prolonged

periods, use climatized No. 2 diesel fuel or dilute the No.

2 diesel fuel with 50% No. 1 diesel fuel. This will provide

better protection from fuel gelling or wax-plugging of the

fuel filters.

WARNING!

Do not use alcohol or gasoline as a fuel blending
agent. They can be unstable under certain conditions
and hazardous or explosive when mixed with diesel
fuel.

Diesel fuel is seldom completely free of water. To prevent

fuel system trouble, drain the accumulated water from

the fuel/water separator using the fuel/water separator

drain provided on the fuel filter housing. If you buy good

quality fuel and follow the cold weather advice above,

4

STARTING AND OPERATING 67

Advertising