Rambox® integrated box side storage bins, Rambox® storage bin cover emergency release lever, Bed extender – Ram Trucks 2014 3500 - User Guide User Manual

Page 142: Utility

Advertising
background image

RamBox® Integrated Box Side Storage Bins

• The cargo storage bins provide watertight, lockable, illuminated storage for up to

150 lbs (68 kg) of evenly distributed cargo.

• To open a storage bin, press and release the pushbutton located on the lid.
• The interior of the RamBox

®

will automatically illuminate when the lid is opened.

Pushing the switch once will turn off the bin lights, pushing the switch again will
turn the lights back on.

• Storage bins feature two removable drain plugs (to allow water to drain from bins). To

remove plug, pull up on the edge. To install, push plug downward into drain hole.

• The RamBox

®

storage bins can be locked and unlocked using the vehicle key or

the remote keyless entry transmitter.

NOTE:
Provisions are provided in the bins for cargo dividers and shelf supports. These
accessories (in addition to other RamBox

®

accessories) are available from MOPAR

®

.

RamBox® Storage Bin Cover Emergency Release Lever

• As a security measure, a Storage Bin Cover Emergency Release is built into the

storage bin cover latching mechanism.

NOTE:
In the event of an individual being locked inside the storage bin, the storage bin cover
can be opened from inside of the bin by pulling on the glow-in-the-dark lever
attached to the storage bin cover latching mechanism.

Bed Extender

• The bed extender has three functional positions:

• Storage Position
• Divider Position
• Extender Position

Storage Position
• The storage position for the bed extender is at the front of the truck bed.
• To install the bed extender into the storage position, perform the following:

• Make sure the center handle is unlocked using the vehicle key and rotate the

center handle vertically to release the extender side gates.

• With the side gates open, position the extender fully forward in the bed against

the front panel.

• Rotate the side gates closed allowing the outboard ends to be positioned in front

of the cargo tie-down loops.

• Rotate the center handle horizontally to secure the side gates in the closed position.
• Lock the center handle using the vehicle key to secure the panel into place and

assist against theft.

UTILITY

140

Advertising
This manual is related to the following products: