Ram Trucks 2014 3500 - User Guide - Manual (Page 29)

Memory Seat
The memory seat feature allows you to save the driver's seat position (excluding lumbar
position), driver's outside mirror position, adjustable brake and accelerator pedals,
Automatic Temperature Control (ATC) temperature setting and radio station preset
settings. The driver's memory buttons are located on the outboard side of the driver's seat
cushion.
• Adjust all memory profile settings,
press the middle button S (SET), then
press 1 or 2 within five seconds.
• To program a Key Fob to the memory
position, place the ignition switch in the
LOCK position and remove the Key Fob,
press and release the LOCK button on the
Key Fob to be programmed within five
seconds of pressing button 1 or 2.
• Press 1 or 2 to recall the saved posi-
tions, or press UNLOCK on the pro-
grammed Key Fob.
Refer to the Owner's Manual on the DVD for further details.
Manual Seats
Forward/Rearward
• Lift up on the adjusting bar located at
the front of the seat near the floor and
release it when the seat is at the de-
sired position. Then, using body pres-
sure, move forward and backward on
the seat to be sure that the seat adjust-
ers have latched.
Recliner
• Lift the recliner lever located on the
outboard side of the seat, lean back
and release at the desired position.
CAUTION!
Do not place any article under a power seat or impede its ability to move as it may
cause damage to the seat controls. Seat travel may become limited if movement
is stopped by an obstruction in the seat’s path.
GETTING STARTED
27