When to use tow/haul mode – Ram Trucks 2014 ProMaster Commercial - Diesel Supplement User Manual

Page 50

Advertising
background image

• The brake pedal is pressed for longer than 10 minutes.
• The driver’s door is opened and the accelerator and

brake are not operated for at least 1.5 seconds.

• The driver selected gear does not match the engaged

transmission gear.

• A fault has been detected in the transmission.

A Blinking Warning:

• The driver selected gear does not match the engaged

transmission gear, the gear information in the cluster
and on the bezel will blink.

When To Use TOW/HAUL Mode

When driving in hilly areas, towing a trailer, carrying a
heavy load, etc., and frequent transmission shifting oc-
curs, press the TOW/HAUL switch to activate TOW/
HAUL mode. This will improve performance and reduce
the potential for transmission overheating or failure due
to excessive shifting. When operating in TOW/HAUL
mode, the transmission shift calibration is modified to
accommodate steep grades in the smoothest possible
manner. TOW/HAUL mode is only applicable in the
DRIVE (D) position.

48

STARTING AND OPERATING

Advertising