Towing tips, Automated manual transmission, Tow/haul mode – Ram Trucks 2014 ProMaster Commercial - Diesel Supplement User Manual

Page 83: Electronic speed control — if equipped

Advertising
background image

Towing Tips

Before setting out on a trip, practice turning, stopping,
and backing up the trailer in an area located away from
heavy traffic.

Automated Manual Transmission

DRIVE (D) (automatic mode) can be used when towing.
If frequent shifting occur while in DRIVE, select TOW/
HAUL mode, or change to MANUAL (M) mode and
manually select a lower gear.

NOTE:

Using a lower gear while operating the vehicle

under heavy loading conditions will improve perfor-
mance and extend transmission life by reducing exces-
sive shifting and heat build up. This action will also
provide better engine braking.

Tow/Haul Mode

To reduce the potential for transmission overheating,
activate the “TOW/HAUL” feature when using DRIVE
(D) (automatic mode) in hilly areas.

Electronic Speed Control — If Equipped

• Do not use in hilly terrain or with heavy loads.
• When using the speed control, if you experience speed

drops greater than 10 mph (16 km/h), disengage until
you can get back to cruising speed.

• Use speed control in flat terrain and with light loads to

maximize fuel efficiency.

5

STARTING AND OPERATING

81

Advertising