Ram Trucks 2014 ProMaster Commercial - Diesel Supplement - Manual (Page 55)

MESSAGE DESCRIPTION
Press Brake Pedal Delayed Startup This messages appears when the key is first turned ON, if the brake is
fault and/or the shift lever is not in NEUTRAL (N). The shift lever must
be in the NEUTRAL (N) position, and the brake pedal must be pressed,
to allow engine cranking. Place the shift lever in NEUTRAL (N) and
apply the brake pedal BEFORE turning the key to the START/AVV
position; otherwise, the engine will not crank and the key must be cycled
OFF, then back on, before cranking is allowed.
Gear Not Available This message appears, along with a warning buzzer:
• When it is not possible to change gear due to a fault in the system.
• When, due a fault in the system, it is only possible to engage 1st (1),
2nd (2), 3rd (3) or REVERSE (R).
Contact your authorized dealer if the message continues to appear.
5
STARTING AND OPERATING 53