Ram Trucks 2014 ProMaster Commercial - Diesel Supplement - Manual (Page 54)

MESSAGE DESCRIPTION
Manual Mode Not Available MANUAL (M) mode is not available, due to a fault or other condition.
Use the DRIVE (D) position to operate the vehicle.
Contact your authorized dealer if the message continues to appear.
Automatic Mode Not Available Automatic (DRIVE) mode is not available due to a fault or other
condition. Use MANUAL (M) mode to operate the vehicle.
Contact your authorized dealer if the message continues to appear.
Clutch Overheating This message appears, together with a buzzer, when the clutch overheats.
In this situation, limit stop and go driving and gear shifts or if necessary
stop the vehicle and turn the engine off to allow the clutch to cool.
If the message continues to appear, contact your Authorized Dealer.
To avoid clutch failure, do not use the accelerator to keep the vehicle at a
standstill (for example holding on a hill); the clutch could be damaged
by overheating. Use the brake pedal instead and operate the accelerator
only when you are ready to drive away.
52 STARTING AND OPERATING