Canon PC1308 - Manual (Page 12)

12
Use the included charger to charge the battery.
Remove the cover.
Insert the battery.
● Align the S marks on the battery and
charger, then insert the battery by sliding it
in
and down .
Charge the battery.
● Flip out the plug and plug it into a
power outlet (for CB-2LX).
● Plug the power cord into the charger, then
plug the other end into a power outlet (for
CB-2LXE).
X The charge lamp lights red, and charging
starts.
● The charge lamp will light green when
charging has finished. Charging takes
approx. 2 hours and 5 minutes.
Remove the battery.
● Unplug the battery charger from the power
outlet, then remove the battery by sliding it
in
and up .
Charging the Battery
CB-2LX
CB-2LXE
To protect the battery and prolong its life, do not charge it for longer than
24 hours continuously.
COP
Y