Canon PC1308 - Manual (Page 86)

86
You can set the shutter speed between 1 and 15 seconds and shoot long
exposures. However, you should attach the camera to a tripod so that the
camera does not move and blur the image.
Select [Long Shutter].
● Press the m button, select the FUNC.
menu #, and press the l button.
Select the shutter speed.
● Press the
qr buttons or turn the  dial,
select shutter speed and press the m
button.
● Pressing the l button will return you
to the exposure compensation screen.
Confirm the exposure.
● When you press the shutter button
halfway, the exposure for the chosen
shutter speed will appear.
Shooting Long Exposures
• The brightness of the image may differ from the brightness of the screen
in Step 3 when the shutter button was pressed halfway.
• When shutter speeds of 1.3 seconds or slower are used, images are
processed to eliminate noise after being taken. A certain amount of
processing time may be needed before you can take the next shot.
• It is recommended that when shooting with a tripod, to set the [IS Mode]
to [Off] (p. 139).
If the flash fires, the image may be overexposed. If this happens, set the
flash to
! and shoot.
COP
Y