Canon PC1308 - Manual (Page 75)

75
You can set the time delay (0 – 30 seconds) and the number of shots (1 – 10
shots).
Display the [Drive Settings]
screen.
● After pressing the p button, immediately
press the n button.
Select
$.
● Press the op buttons or turn the  dial
to select [Self-Timer], then use the qr
buttons to select $.
Make the settings.
● Press the op buttons, or turn the Â
dial to select [Delay] or [Shots].
● Press the qr buttons to select a value,
then press the m button.
● Select the $ in Steps 1 and 2 on p. 61.
• Exposure and white balance settings are fixed to the first shot.
• When you set the time delay for more than 2 seconds, the self-timer lamp and
sound speed up 2 seconds before the shutter releases (when the flash will fire,
the lamp will light).
You can use a TV to display the camera screen.
•
Connect the camera to a TV as described in “Viewing Images on a TV” (p. 106).
•
Operations for shooting are the same as when using the camera’s
monitor.
$ Customizing the Self-Timer
What if the number of shots is set to more than 2 shots?
• If the flash fires, the shooting interval may take longer.
• If you set a high number of shots, the shooting interval may take longer.
• If the memory card becomes full, shooting stops automatically.
Shooting Using a TV
COP
Y