Sceptre X46BV-FULLHD - Manual (Page 26)

SCEPTRE X46 HDTV User Manual
- 26 -
www.SCEPTRE.com
Connecting Your
Antenna / Cable to TV
If You Have Digital Cable without
Cable Box or Antenna…
1. Make sure the power of X46 LCD HDTV is turned off.
2. Connect the Coaxial RF cable from your antenna or digital cable to
the ATSC/NTSC port off the back of your X46 LCD HDTV.
3. Turn on X46 LCD HDTV.
4. Select TV (Air) for antenna or TV (Cable) for digital cable from either
your remote control’s source button or source button on the right side
of the TV.
5. Use the On Screen Display to scan for channels.
Please Note :
• Not all broadcasts are in High Definition (HD). Please refer to your local
broadcasting stations for more information.
• The X46 LCD HDTV’s tuner is designed for HDTV therefore requires a stronger
signal than normal TVs. If you cannot achieve that signal level with your antenna
or cable, your X46 LCD HDTV might lose picture or sound.
• This TV will turn off automatically if there’s no signal present for more than 15
minutes.