Sceptre X46BV-FULLHD - Manual (Page 36)

SCEPTRE X46 HDTV User Manual
- 36 -
www.SCEPTRE.com
If You Want the Fair Connection
with Composite…
1. Make sure the power of X46 LCD HDTV and your set-top box is
turned off.
2. Obtain a Yellow Video Cable. Connect the Yellow Video connector to
both your set-top box and AV 1’s Yellow Video connector port off the
back of your X46 LCD HDTV.
3. Obtain a RCA Audio Cable. Connect the white color connector to
both your set-top box and AV 1’s white connector port off the back of
your X46 LCD HDTV.
4. Connect the red color connector to both your set-top box and AV 1’s
red connector port off the back of your X46 LCD HDTV.
5. Turn on the X46 LCD HDTV and your set-top box.
6. Use the remote control’s source button or the source button on the
right side of the TV to switch to AV 1 (CVBS).
Please Note :
• If AV 1 is already occupied, please use AV 2 as your connection port
and switch source to AV 2 (CVBS).
• Please reference the set-top box’s manual as well, to make sure the
set-top box is configured to output correctly to the TV.
• AV 2 is located on the left side of the TV, while facing the front of the TV.
• Sceptre’s X46 LCD HDTV supports SONY’s universal remote code.
Please look up SONY’s codes in your universal remote’s hand
book.
• This TV will turn off automatically if there’s no signal present for more
than 15 minutes.