Sceptre X46BV-FULLHD - Manual (Page 40)

SCEPTRE X46 HDTV User Manual
- 40 -
www.SCEPTRE.com
Connecting Game
Consoles to the TV
For your Playstation®3…
1. Make sure the power of X46 LCD HDTV and your Playstation 3 is turned
off.
2. Connect a HDMI cable to the HDMI output of your Playstation 3 and the
other end to the HDMI port off the back of your X46 LCD HDTV.
3. Turn on the X46 LCD HDTV and Playstation 3.
4. Use the remote control’s source button or the source button on the right
side of the TV to switch to HDMI 1.
Please Note :
• Please reference the Playstation 3’s manual, to make sure the PS3 is
configured to output correctly to the TV. PS3 by default outputs to
composite only. With newer firmwares PS3’s HDMI should also output
a signal. Please call up PS3’s tech support for further troubleshooting.
• This TV does not decode Bitstream digital audio, therefore you’ll need to
make sure your DVD is setup for PCM digital audio through HDMI.
• If HDMI 1 is already occupied, please use HDMI 2 as your connection
port and switch source to HDMI 2.
• This TV will turn off automatically if there’s no signal present for more
than 15 minutes.