SeaLand DVS02 Vacuum Status Control - Manual (Page 5)

5
EN
1 Notes on using the manual
Caution!
Safety Instruction: Failure to observe this instruction can cause material damage and impair
the function of the device .
Note
Supplementary information for operating the device .
fig . 2 A, page 2 : This refers to an element in an illustration . In this example, item A in
figure 2 on page 2 .
2 General safety instructions
Read all instructions before use or installation.
The manufacturer will not be held liable for claims for damage resulting from the following:
• Faulty installation or connection
• Damage to the unit from mechanical influences, misuse or abuse
• Alterations to the unit without express written permission from the manufacturer
• Use for purposes other than those described in this manual
3 Intended use
The SeaLand DVS02 panel provides two functions that make using a VacuFlush toilet system easier
and more efficient . The panel indicates whether or not there is enough vacuum pressure for an effective
flush, and the power switch allows turning off electrical power to the vacuum system during periods
when the toilet is not in use and you do not want the vacuum system to operate . If connected to a “full
tank” sensor, an illuminated red light can also indicate that the holding tank is full .
3.1 Vacuum status monitor
For instant, powerful flushes, VacuFlush toilets should be flushed only when vacuum in the toilet system
is at its optimum level. An illuminated green light on the DVS02 panel indicates when the system is
ready for flushing (fig.
3 A, p. 2). After the toilet is flushed, the red light will illuminate (fig. 3 B, p . 2)
– this indicates that the toilet system is in the process of building vacuum to the proper level for the next
flush. When the red light shuts off and the green light glows, the toilet system is ready for the next flush.
Table of contents
1 Notes on using the manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2 General safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3 Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 6
4 Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
5 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 7
6 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 9
7 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
8
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 12
9 Customer service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Dometic Vacuum Status Control Panel Notes on using the manual