Seville Classics UHD20205 - Manual (Page 10)

(pg 9 of 19)
Step 4.
Step 5.
Step 6.
Install the Right Panel (#3).
Install the Middle Panel (#5).
UltraHD Rolling Cabinet (Model No. 20205)
Attach the Right Panel (#3) to Front Frame (#2). Make sure
the “Top” of the Right Panel (#3) is on the Maple Wood Top
(#10). Use Screw Driver (#24) and Screw A (#20) to tighten
the Right Panel (#3) to the Front Frame (#2) and then to the
Maple Wood Top (#10).
a. Attach the Upper Back Panel (#7) between the Left Panel
(#4) and Right Panel (#3). Make sure the “Top” of the Upper
Back Panel (#7) is on the Maple Wood Top (#10) as the
sticker indicates. Line up the screw holes and use Screw A
(#20) to tighten up the Upper Back Panel to the Maple Wood
Top (#10), Left Panel (#4) and Right Panel (#3).
b. Attach Bottom Back Panel (#6) between the Left Panel
(#4) and Right Panel (#3). Make sure the “Top” of the Bottom
Back Panel (#6) is to the Upper Back Panel (#7) as the
sticker indicates. Line up the screw holes and use Screw A
(#20) to tighten the Bottom Back Panel (#6) to the Upper
Back Panel (#7), Left Panel (#4) and Right Panel (#3).
Attach the Middle Panel (#5) into the cabinets as drawing
above. Make sure the “Top” of the Middle Panel (#5) is to the
Maple Wood Top (#10) as the sticker indicates. Use Screw A
(#20) to tighten the Middle Panel (#5) to the Bottom Back
Panel (#6), Upper Back Panel (#7) and Front Frame (#2).
Install the Upper Back Panel (#7) and Bottom Back Panel
(#6).
Back
Front
Front
Back
Front
Back
Front
Back