Seville Classics UHD20205 - Manual (Page 9)

Step 1.
Step 2.
Step 3. Install the Left Panel (#4).
Open the package, remove and place all parts to the side. Then
open the package of the Maple Wood Top (#10).
Note: The Maple Wood Top is packed within an inner
cardboard box.
Locate the Front Frame (#2) and attach to the "Front" of the
Maple Wood Top (#10) using Screw Driver (#24) and Screw A
(#20).
Note: The screw holes have some tolerance so make sure that
the top and sides of the Front Frame are flushed with the Maple
Wood Top – this may save time by avoiding having to make
slight adjustments later.
Attach the Left Panel (#4) to Front Frame (#2) and Maple Wood
Top (#10). Make sure the “Top” of the Left Panel (#4) is on the
Maple Wood Top (#10) and the screw holes are lined up to the
Front Frame (#2). Use Screw Driver (#24) and Screw A (#20)
with Washer (#27) to tighten the Left Panel (#4) to the Front
Frame (#2) and then to the Maple Wood Top (#10).
UltraHD Rolling Cabinet (Model No. 20205)
(pg 8 of 19)
Install Front Frame (#2).
Front
Back
Front
Back
Back
Front