Seville Classics UHD20205 - Manual (Page 16)

(pg 15 of 19)
Step 17 :
Step 18:
Step 19:
Stack Assembly Instruction
*Note 1: Recommended for 2 people to Stack one set Rolling Cabinet on top of the bottom set .
*Note 2: Determine which unit will be the bottom and the top.
Pull the four drawers out of the bottom unit. Use Screwdriver
(#24) to remove all screws in order to remove the Maple
Wood Top (#10).
Use Screwdriver (#24) to remove four Bumpers (#17) and
Wheels (#14 and #15) of the top unit you want to stack.
Stack the top unit onto the bottom unit. Use Screw D (#25) to
tighten as picture shown to left.
Note: Before you stack the top unit, make sure the drawers
and cabinet door are locked.
When assembled, place drawers into the bottom drawer.