Seville Classics UHD20205 - Manual (Page 14)

(pg 13 of 19)
Step 14.
Step 15.
a. Decide the height for each Middle Shelf (#9), place
the Hooks (#23) into the hook slot and push down.
Note: The Middle Shelf has 4 Hooks at four corners for
support. Place the 4 Hooks at the four corners and
make sure they are the same height.
b. Place the Middle Shelf (#9) into the cabinet and push
down onto the Hooks (#23).
UltraHD Rolling Cabinet (Model No. 20205)
Install four Drawers into cabinet.
To insert Drawers, pull out the drawer tracks and inner
ball bearing tracks as far as possible. Then fit the
tracks attached to the Drawer to the inside of the track
attached to the Right Panel (#3) and Middle Panel (#5).
Use the same way to install all four Drawers. Next, slide
the four Drawers (three small and one large) one at a
time into the unit.
Install the Middle Shelf (#9).
After sliding in the four Drawers, place the Drawer Mats
(#16) inside the Drawers.
WARNING:ball bearing track must be pulled
out all the way to stay in the front of slider