Shellab SCO10W-2 - Manual (Page 17)

17
HEPA C02 FILTER
The CO2 Incubator design features a HEPA filtration system with a patented copper housing. (Patent
Number 6,333,004) As the chamber air is drawn through the filter system, airborne microbes and isolated
particulates are not only removed from the air, but destroyed as well. It is through copper oxidation that the
contaminants are actually killed. The HEPA filter is easily replaced without the need of any tools and has an
efficiency rating of 99.97% at 0.3 microns.
Install the HEPA Filter onto the duct prior to installing the duct in the unit.
WARNING: Ensure that when installing the duct to ensure that the duct is not touching the C02 sensor head
as this may cause erroneous readings.
Section
8
The Hepa filter attaches to a fixed
coupling ring with a direct “snap-in”
action. Push straight up to the coupling
ring to connect. Pull the filter straight
down to disengage. Replacement
Hepa filters is available from Sheldon
Mfg., Inc. Part Number 2800517.