Shellab SRI20PF - Manual (Page 11)

11 | P a g e
INSTALLATION (CONTINUED)
S HELVING I NSTALLATION
SRI6PF and SRI20PF Standard Shelving Installation
Perform the following steps to install the SRI6PF and SRI20PF incubator standard shelves:
Figure 2: Standard Shelf Mounting Bracket Installation
1. Laterally insert the mounting bracket’s 2 pairs of twin tabs (front and back) into the slots on
the sides of the incubator chamber.
2. Slide the bracket down so that the tabs are securely seated in the mounting slots.
3. Repeat the process on the opposite side of the chamber with the second mounting bracket.
4. Hang 1 shelf off the 2 installed mounting brackets.
Figure 4: Standard Shelf Hung From
Mounting Bracket Figure 3: Standard Mounting Bracket In
Place