Shellab SSI2-2 - Manual (Page 10)

Page | 10
OPERATION
F EATURES
 Constant Monitoring System (CMS) ensures precise control over speed and temperature.
 Extremely compact.
 Acryl lid allows internal viewing without disturbance.
 Brushless DC motor and beltless drive system minimizes noise and vibration.
 Digital control panel displays temperature, speed, time.
 A circulation fan helps to ensure even air heating within the closed incubation space.
 Optional accessories available for most common laboratory vessels.
P
OWERING
U
P
Push the power switch located on the rear of the machine to the ( I ) ON position. The display will
illuminate.
S ETTING THE T EMPERATURE
To enter a temperature for the incubator, press the SET key located underneath the °C temperature
display. An adjustable temperature set point will be displayed and will blink continuously. The set
point can be adjusted by using
the UP (▲) and DOWN (▼) keys. Once the desired temperature set
point is displayed, press the SET key to confirm save.
Note: If the SET key is not pressed, the incubator will revert to the previous temperature.
S ETTING THE R UNTIME
To enter a runtime, press and hold the RPM / TIME key for until LED display reads "t 00.00". Press
the SET key located underneath the RPM / Time display. An adjustable runtime will be displayed
and will blink continuously. The runtime can be adjusted by using
the UP (▲) and DOWN (▼) keys.
Once the desired runtime is displayed, press the SET key again to confirm and save.
Note: If the SET key is not pressed, the incubator will revert to the previous runtime setting.