Shellab SSI2-2 - Manual (Page 15)

15 | P a g e
UNIT SPECIFICATIONS
Each incubator is a 110 - 120 or 230 AC voltage unit. Please refer to each incubator’s data plate for
its electrical specifications.
Technical data specified applies to units with standard equipment at an ambient temperature of
25°C and a voltage fluctuation of ±10%. The temperatures specified are determined in accordance
to factory standard following DIN 12880 respecting the recommended wall clearances of 10% of the
height, width, and depth of the inner chamber. All indications are average values, typical for units
produced in the series. We reserve the right to alter technical specifications at all times.
W
EIGHT
Model Weight
SSI2 SSI2-2 45 lbs / 20.4 kg
U NIT D IMENSIONS
In inches
Model Exterior W × D × H Platform W x D
SSI2 SSI2-2 11.3 x 15.8 x 11.5 in 9.5 x 11.5 in
In Centimeters
Model Exterior W × D × H Platform W x D
SSI2 SSI2-2 28.6 x 40.01 x 29.3 cm 23.5 x 29.2 cm
O SCULATION R ATE
Model RPMs
SSI2 SSI2-2 30 to 400 RPMs in 1 RPM increments
S
HAKING
W
EIGHT
Model RPMs
SSI2 SSI2-2 9 lbs / 4 kg