Shellab SSI2-2 - Manual (Page 4)

Page | 4
INTRODUCTION
Thank you for purchasing a Sheldon Shaking Incubator 2. We know tha t in today’s competitive
marketplace, customers have many choices when it comes to constant temperature equipment. We
appreciate you choosing ours. Our continued reputation as a leading laboratory product
manufacturer rests with your satisfaction. Sheldon Manufacturing, Inc. stands behind our products,
and we will be here if you need us.
These incubators are intended for professional, industrial, or educational use. They are not
designed for use in hazardous or household locations.
Before using the incubator read this entire manual carefully to understand how to install, operate,
and maintain the unit in a safe manner. Keep this manual available for use by all workstation
operators. Ensure that all operators are given appropriate training prior to using the incubator.
G ENERAL S AFETY C ONSIDERATIONS
Note: Failure to follow the guidelines and instructions in this manual may create a protection
impairment by disabling or interfering with the unit’s safety features. This can result in injury
or death.
Your shaking incubator and its recommended accessories are designed and tested to meet strict
safety requirements. Only use this equipment for its intended application; any alterations or
modifications void the warranty.
For continued safe operation of your incubator, always follow basic safety precautions including:
 Follow all local or regional ordinances in your area regarding the use of this unit. If you
have any questions about local regulations, please contact the appropriate local agency.
 Use only approved accessories. Do not modify system components. Any alterations or
modifications to your incubator can be dangerous and void your warranty.
 Always plug the incubator power cord into an earth grounded electrical outlet that conforms
to national and local electrical codes. If the incubator is not grounded properly, parts such
as knobs and controls can conduct electricity and cause serious injury.
 Avoid damaging the power cord. Do not bend it excessively, step on it, or place heavy
objects on it. A damaged cord can be a shock or fire hazard. Never use a power cord if it is
damaged.
 Do not position the incubator in such a manner as to make it difficult to unplug the unit in
the event of an emergency.
 Do not attempt to move the incubator while in operation.