SIG SAUER SIG716 Rifle - Manual (Page 30)

30 www.sigsauer.com
2.1.7 butt stock operation
The butt stock on the Sig716 may vary depending on the specific model you have. The butt stock provides for easy
adjustment of the length to accommodate the individual shooter or for storage. To adjust the length of the butt stock,
fully depress the release latch and pull the stock rearward to extend or push the stock forward to collapse.
intermediate positions may be selected by partially depressing the release latch and moving the stock to the desired
position.
FIG 13 Butt stock collaPsed and Fully extended
to remove the butt stock:
depress the adjustment lever to disengage the release latch and slide the stock to full extension.
grasp both ends of the release pin and pull down as you slide the stock from the receiver extension.
release latch