SIG SAUER SIG716 Rifle - Manual (Page 32)

32 www.sigsauer.com
to re-install the butt stock:
do noT force THe ParTS TogeTHer! align the stock body with the receiver extension and gently slide the stock on to
the extension until it stops. With the release lever fully depressed, insert the tip of the included Polymer dummy round
into the recessed hole in the locking pin. use the Polymer dummy round as a lever to pry the locking pin down to its
stopping point. once the locking pin is clear of the receiver extension you can slide the stock onto the receiver extension.
check to see that the stock moves to all positions locks into place.
FIG 15 Insert vIew oF Butt stock InstallatIon