1 operation of fire control/safety – SIG SAUER SIG716 Rifle User Manual
Page 40
40
www.sigsauer.com
2.2.1 operation of fire control/safety
four basic fundamentals of safe firearm handling should be applied during any and all activities described in this manual.
Treat every firearm as if it were loaded.
always keep the muzzle pointed in a safe direction until ready to shoot.
Keep your finger off of the trigger and out of the trigger guard until ready to fire.
Be aware of your target and what is beyond it.
The Sig716 is equipped with an ambidextrous fire control selector lever commonly referred to as a “safety lever” which can
be manipulated from either the left or right side of the lower receiver. The selector has two (2) positions, Safe and SeMi.
Safe - Trigger is locked and rifle
cannoT
be fired with a normal press of the trigger.
FIG 21 FIre control selector on saFe
Manual SafeTy “on”