SilentKnight 5104 Digital Alarm Communicator Transmitter 6 Zone - Manual (Page 30)

5230 Operation 151053-L8
5-3
Step.
Used to advance to a different programming step while
in programming mode. In reference to any
programming tasks this key will be referred to as the
“Step” key. followed by the desired step number.
Refer to Section 6 for programming information.
Perform upload or download to a remote computer.
Installer Code.
Display Troubles.
Used to display any system troubles. Installer or Operator Code.
Display Memory
Used to display all system events including Alarms,
Troubles, and Supervisory conditions.
Installer or Operator Code.
Dialer Reset.
Resets dialer and discontinues communication
attempts. Installer Code.
Table 5-2: Touchpad Keystrokes and Their Task or Function
Task or Function Keystroke
SILENCE
STEP
LOAD
4
ENTER
DISPLAY
6
TRBL. ENTER
DISPLAY
5
MEMORY ENTER
DIAL.
3
RESET ENTER