SilentKnight IP Communicator - Manual (Page 5)

IP Communicator Series Installation Document — P/N 53109:I 4/26/2010 5
2. Secure the IPBRKT bracket to the backbox by installing the supplied screw into the top tab as illustrated in Figure 2.
The screw will feed through hole in emboss and self-thread into bracket hole.
3. Secure IPDACT Module to IPBRKT bracket using the four supplied standoffs as illustrated in Figure 3.
4. Wire the IPDACT as described in the following sections of this document.
5. Attach the label/cover to the IPDACT by pressing it onto the four standoffs installed in step 3.
IPBRKT bracket
Backbox
screw
Figure 2 IPBRKT Installation
IPB
R
K
T
in
st
a
ll2
a.wm
f
FACP backbox
label/cover
IPBRKT bracket
IPDACT module
standoff
standoff
standoff
standoff (not used for
IPDACT-2 or IPDACT-2UD)
Figure 3 IPBRKT Installation
IP
BR
KTi
n
sta
ll3
a.
wm
f