SilentKnight IP Communicator - Manual (Page 6)

6 IP Communicator Series Installation Document — P/N 53109:I 4/26/2010
2.1.2 IPCHSKIT (Chassis) Installation
1. Secure the IPDACT Module to the IPCHSKIT mounting plate using the four supplied standoffs as illustrated in
Figure 4.
2. Install the IPCHSKIT mounting plate into the chassis and secure with the supplied screws. (For specific chassis
installations, refer to the IPCHSKIT Installation Document #53294.)
3. Wire the IPDACT as described in the following sections of this document.
4. Attach the polycarbonate cover with label to the IPDACT by pressing it onto the four standoffs installed in step 1.
IPCHSKIT mounting plate
IPDACT Module
polycarbonate cover with label
standoffs
2 screw locations
2 screw locations
(underneath)
Figure 4 IPCHSKIT Installation
ipch
skit.wmf