SilentKnight SK-FFT - Manual (Page 20)

SK-FFT Installation and Operation Manual
3-4 54711
Re-Attaching the Cabinet Door
To re-attach the cabinet door reverse the procedure in section 3.1.2.1.
3.2 Installing the Fire Fighter’s Hand Set
FFT Local Handset installation involves the following steps:
1. Insert phone cord through hole of dead front panel. See Figure 3-5.
Figure 3-5 Handset Cord Inserted Through Dead Front Panel Hole
2. Attach strain relief clip to the phone cord. The strain relief clip should have about 2
¾” of phone cord though it. See Figure 3-6.
Figure 3-6 Installing Strain Relief Clip
3. Push the strain into the hole in the dead front panel.