SilentKnight SK-FFT - Manual (Page 27)

Installation
54711 3-11
3.9 Installation of FFT-STS
The Single Telephone Station comes in a series of parts. The telephone chassis,
backbox, breakglass kit and door with keylock are all ordered separately. Up to ten
remote handsets may be operated simultaneously.
3.9.1 Assembly of Units with Coiled Cord Handsets
The following assembly steps are for telephones with coiled cord handsets. These
steps must be accomplished once the enclosure has been mounted and the system
wiring is in place
1. Attach system wiring to the terminal strip on the telephone chassis assembly
2. Install 6-32 nut in backbox. Do not tighten.
3. Install telephone chassis assembly in backbox.
4. Install trim ring on backbox with 6-32 wing nuts. Do not tighten.
5. Install door assembly. Tighten wing nuts.
Figure 3-13 FFT-STS Telephone Connection
Figure 3-14 EOL Example
Contact EOL set
to Connected
*See Figure 3-14
for EOL example