Crestron electronic ST-1700C - Manual (Page 28)

1-Way Wireless RF Touchpanel Crestron ST-1700C
Use the drop down Interlock Group: field to select an existing group, or click on
Groups to open the “Edit Interlock” window, which allows you to edit the existing
groups or create a new group.
“Edit Interlock” Window
Select New to create a new interlock group. Select Edit if you wish to modify an
existing group. In either case, the “Create Interlock” window appears.
“Create Interlock” Window
For new interlock groups, move the cursor over each button to be added and left-click
to select it. (Notice that the cursor assumes the pointing hand shape when it is over the
page.) If a button is inadvertently placed in the “Buttons:” field, highlight the button
and select Delete to remove it from the group. Select OK to confirm and save the
interlock group.
To edit an existing interlock group, select the group in the “Edit Interlock” window and
click Edit to open the “Create Interlock” window. Add or delete buttons as needed.
Duration
A button defined with duration feedback will remain active for a fixed time period as
defined in the Duration field. The purpose of a duration feedback is to simulate a
function in the SIMPL Windows program that must remain active for a certain amount
of time, such as closing drapes or lowering a screen.
Right-click on the desired button, and select Feedback. In the “Feedback” window,
select Duration as the feedback type, and enter the desired duration in seconds.
Sequence Groups
A sequence group consists of a number of assigned buttons that are activated as a
group as a result of a single button press. When the first button is activated, the other
24 • 1-Way Wireless RF Touchpanel: ST-1700C Operations Guide – DOC. 6050