CITIZEN CT-S300 - Manual (Page 105)

— 100 —
• a = 116: When kind of paper is specified
Setting Status Sending Data
Stored Print
1st Byte 2nd Byte 3rd Byte 4th Byte 5th Byte
Value Control
1
Single-color
49 (“1”) — — — —
paper
2 2-color paper 50 (“2”) — — — —
• a = 201: When ACK output position is specified
Setting Status Sending Data
Stored ACK Output
1st Byte 2nd Byte 3rd Byte 4th Byte 5th Byte
Value Position
1 ACK-in-Busy 49 (“1”) — — — —
2
ACK-while-
50 (“2”) — — — —
Busy
3
ACK-after-
51 (“3”) — — — —
Busy
• a = 202: Input buffer full Busy output/cancel timing
Setting Status Sending Data
Stored BUSY
1st Byte 2nd Byte 3rd Byte 4th Byte 5th Byte
Value Output/Cancel
1 49 (“1”) — — — —
2 50 (“2”) — — — —
3 51 (“3”) — — — —
4 52 (“4”)
• a = 207: PNE sensor judgment time
Setting Status Sending Data
Stored Monitor
1st Byte 2nd Byte 3rd Byte 4th Byte 5th Byte
Value Time
1 50 ms 49 (“1”) — — — —
2 100 ms 50 (“2”) — — — —
3 150 ms 51 (“3”) — — — —
4 200 ms 52 (“4”) — — — —
5 300 ms 53 (“5”) — — — —
6 500 ms 54 (“6”) — — — —
• a = 208: Normal/reverse rotation processing
Setting Status Sending Data
Stored Paper Feed
1st Byte 2nd Byte 3rd Byte 4th Byte 5th Byte
Value Amount
0 0 dot 49 (“1”) 48 (“0”) 48 (“0”) 48 (“0”) 48 (“0”)
• • • • • • •
• • • • • • •
• • • • • • •
65535 65535 dots 54 (“6”) 53 (“5”) 53 (“5”) 51 (“3”) 53 (“5”)