Features information and instructions – SunBriteTV 5510HD User Manual

Page 36

Advertising
background image

Page 36

When programming a DirectTV, local cable universal remote control or Control system, you may fi nd that SunBriteTV may not be on the
list of TV manufacturers. If that is the case, Model 5510HD supports SONY’s universal remote code.

Programming Other Manufacturers’ Universal Remote Control Devices

Internal Thermostatically-Controlled Heater

The Internal Thermostatically-Controlled Heater keeps the unit warm in freezing temperatures and activates automatically when the
SunBriteTV internal temperature sensor reads a temperature inside the unit of 32

O

F. or lower. The heater remains on until the internal

temperature rises to at least 42

O

F. The heater provides a 20

O

F. temperature rise, allowing the TV to safely remain in temperatures as low

as -24

O

F. The ventilation fans are not activated when the heater is running and will automatically activate when required.

If temperatures below -24

O

F. are expected, we recommend that you bring your SunBriteTV inside to prevent damage to the LCD screen.

Note: In order for the automatic heater to work properly, your SunBriteTV must have power applied at all times.

SunBriteTV Pixel Quality Policy

SunBriteTV’s Pixel Quality Policy
(Applicable to LCD TVs sold within USA and Canada only.)

SunBriteTV

TM

LCD screens are manufactured with rigorous standards to maintain optimal viewing. However, the LCD screen may

have minor defects that appear as a small bright or dark pixel. This is common to all LCD screens used in display and television
products, and is not specifi c to SunBriteTV.

Bright dots are dots that appear bright and unchanged in size when a LCD TV screen displays a black pattern.

Dark dots are dots that appear dark and unchanged in size when a LCD TV screen displays a pure red, green, or blue pattern.

Adjacent dots are pixels located directly next to each other.

Your SunBriteTV will be replaced under warranty if it meets one of the following criteria:

—A total of 7 defective pixels, including both bright dots and dark dots are present. (Model 5510HD LCD TV screen has over a million
pixels.)

—2 or more pairs of adjacent bright dots are present.

—3 adjacent bright dots are present.

—3 adjacent dark dots are present.

To locate defective pixels, the LCD panel should be examined under normal operating conditions, in its native display resolution,
with a 90 degree viewing angle, from a distance of a approximately 20 inches.

To qualify for replacement, a defective LCD screen must be reported to SunBriteTV within 14 days from the day the customer
receives the TV.

For questions, please call our toll-free service number at 866.357.8688.

Features Information and Instructions

Advertising