TC-Helicon VoiceLive 2 User manual - Manual (Page 33)

Connect your mic and headphones to VoiceLive2 and
pick a preset you like. VoiceLive 2 will send the fully
processed sound to your DAW and you’ll be able to
monitor through your headphones or the analog audio
outputs of VoiceLive 2. In order to set VoiceLive 2’s
sample rate, play a little bit of audio from your DAW
before recording your vocal track.
Method #2 - Processing vocals from your DAW:
To use VoiceLive 2 as an effects insert, set the I/O
parameters as such:
1. DIGITAL IN: USB: VOX L / INST R
2. DIGITAL OUT: FULL MIX
Configure an aux send in your DAW to send the vocal
track to VoiceLive 2’s left input and the instrument track
to the right. You can monitor through VoiceLive’s
headphone or main outputs. When playing back using
VoiceLive 2 as the output audio device, don’t forget to
set the DIGITAL IN back to USB: STEREO.
Connecting VoiceLive 2 To A Computer
33
VoiceSupport’s HOME page) is current with the version
shown on the TC-Helicon website. If a newer version is
available, you can download it from our website.
VoiceLive 2 And Digital Audio
Here are a few common methods of using VoiceLive 2
with a USB-connected computer and an audio
application (DAW):
1. Capturing a full mix of your performance
2. Processing vocals from your DAW
3. Recording dry vocal and guitar tracks
We assume you are familiar with configuring your audio
application for input and output and that you understand
connection of VoiceLive 2’s inputs and outputs.
Method 1 - Capturing a full mix of your performance:
Set VoiceLive 2’s I/O parameters as such:
DIGITAL IN: USB: STEREO
DIGITAL OUT: FULL MIX