TC-Helicon VoiceLive 2 User manual - Manual (Page 74)

Overview
The FX tab contains the edit settings for a combination
of two effects:
o Transducer, which uses distortion and steep filters
to emulate the sound of radios, phones and devices
that generally degrade the audio signal.
o HardTune, which is a pitch corrector that has been
optimized to produce corrective pitch correction
as well as obvious effects made popular by a
number of artists.
Both effects can be used simultaneously or
independently.
TRANSDUCER
This parameter turns the Transducer effect on or off for
the current preset.
ROUTING:
Selects where the Transducer effect is inserted into the
signal path for maximum flexibility.The options are:
o OFF - No routing.
o LEAD - Transducer is inserted on the Lead voice
only. Harmonies and Doubling are unaffected.
o HARMONY - Transducer is inserted on the
Harmony path only.
o VOICES - Transducer is inserted on both the Lead,
Harmony and Doubling voices.
o LEAD FX - Transducer is inserted on the Lead
send to the μMod, Delay and Reverb effect sends.
Lead voice will be clean and the effects will be
affected by the Transducer style.
o HARM FX - transducer is inserted on the
HARMONY send to the effects. Lead and
Harmony voices will be clean but the effects driven
by only the Harmonies will be affected by the
Transducer style.
TRANSDUCER STYLE
Use the soft knob assigned to this parameter to choose
a Transducer style you like. The Routing and Gate
Threshold parameters are not part of the style.
The Edit Menu: FX Tab
74