TC-Helicon VoiceLive 2 User manual - Manual (Page 38)

The Tone Button
The Tone button activates what we call the “Live
Engineer Effects”.These are different from standard vocal
processing effects in that they adjust their settings to
your particular voice and the way you sing at different
times of your performance just like a professional audio
engineer will. All EQ and compression enhancements
applied here will affect the overall sound of VoiceLive 2
including Harmony, Doubling, Reverb etc.
The suite of effects that make up Tone are:
o Adaptive Shape EQ
o Adaptive Compression
o De-Ess
o Adaptive Gate
The TONE Tab
Press and hold the Tone button to enter this screen and
make adjustments or view settings.This will present the
TONE tab allowing convenient control of these four
processors in one screen. At any time you can exit the
tab menus by pressing the Home button.
The factory settings for the Tone button are:
o SHAPE
ADAPTIVE=X(On), SHAPE=50%
o COMPRESS
ADAPTIVE=X(On), COMPRESS=50%
o DE-ESS
DE-ESS=50%
o GATE
ADAPTIVE
These settings are intended to apply to a broad range of
singers’ tastes and PA equipment. Making adjustments
consists of turning the Mix/Edit knobs below the LCD
and listening to the results. You can also cycle the Tone
button on and off while editing to hear the difference
between your effected and non-effected voice.
The Global Controls:Tone
38