TeeJet CenterLine v1.05 - Manual (Page 24)

CenterLine
Software Version 1.05
Setting Description
OFF No Status Detect implemented. Default setting.
ON Status detect assumes a single swath centered on the vehi-
cle.
Table 3: Status Settings
Alarm
The <ALARM> setting, when set to ON, notifies the operator when entering a previously applied
area. The text window displays <APPLIED> when the implement swath is in a previously applied
area of the field.
To set the Alarm setting, go to Guidance setup, scroll until <ALARM> is displayed in the text win-
dow, and press enter. Using Up or Down, scroll between the <ON> and <OFF> settings until the
desired setting is displayed in the text window. Press Enter to save the setting and return to the
Guidance setup menu.
Figure 18: Setting the Alarm
Setting Description
Off No applied area detection.
On Applied area detection alarm.
Table 4: Status Detect Settings
CenterLine
CenterLine Setup 18